Rockwell Automation 842D-60131331BXA DeviceNet Encoder User Manual - Manual (Page 31)

Configuring a Scanner to Communicate with the Encoder 5-5
Figure 5.2 Scanlist Page in the Device Edit Dialog Box
6. Select the Automap on Add box (a check mark will appear).
7. Under Available Devices, select the encoder, and then click >
(Right Arrow) to add it to the scanlist.
Figure 5.3 Scanlist Page in the Scanner Module Dialog Box
8. Under Scanlist, select the encoder, and then click Edit I/O
Parameters. The Edit I/O Parameters dialog box appears.