Rockwell Automation 937CS-AITMP-DC1 Universal Temperature Converter Installation Instructions - Manual (Page 15)

14
Bul. 937
C Universal Temperature Converter Installation Instructions
Diagnosis
If you have started the communication between PACT ware TM and
Bul. 937CS-AITMP-DC1
(e. g. via Device data
→ Establish connection), you can open the Diagnosis window via
Device data
→ Diagnosis. It shows the following information:
Explanations:
• Memory error: error in the memory of the
Bul. 937CS-AITMP-DC1; if this error was caused by
an incorrect data transfer,
you can eliminate it via Device data → Additional functions → Service
(see section
Service); otherwise, please contact Rockwell Automation
• Internal device error: please contact Rockwell Automation
• Redundancy error: only if Redundancy active has been selected (see
Menu Input Extras) in the case of
a lead fault at both inputs (see below)
• Simulation mode: see
Simulation section