Rockwell Automation 937CS-AITMP-DC1 Universal Temperature Converter Installation Instructions - Manual (Page 5)

4
CORRECT: Device
snapped on vertically. INCORRECT: Device snapped on from
the side. Can damage the contacts and
cause the device to fail.
Bul. 937
C Universal Temperature Converter Installation Instructions
Mounting
The Universal Temperature Converter is constructed in protection class IP20 and
must therefore be protected from undesirable environmental conditions (water, dust,
small foreign objects).
Attention
The Universal Temperature Converter can be mounted on a 35 mm top-hat rail corresponding to DIN EN
50022. The devices must be snapped onto the rail
vertically, and never slanted or tipped to the side.
Further mounting alternatives, e. g. using the Power Rail, can be found in the operating instructions for the
Bul 937 at www.ab.com.