Rockwell Automation 937CS-AITMP-DC1 Universal Temperature Converter Installation Instructions - Manual (Page 7)

6
Bul. 937
C Universal Temperature Converter Installation Instructions
2- 1+
2- 1 3+
2- 1+
2- 1- 3+ 4+
937A-TCJC
2- 1- 3+
2- 3+
equal lead resistances
equal lead resistances
The following sensors can be connected:
• Resistance temperature sensors
− Pt10, Pt50, Pt100, Pt500, Pt1000
according to EN 60751: 1995 or
GOST 6651-94
− Ni 100 according to DIN 43760
− Cu10, Cu50, Cu100 according to
GOST P50353-92
in 2-wire, 3-wire or 4-wire technique
• Thermocouples
− Type B, E, J, K, N, R, S, T according to
IEC 584-1: 1995
− Type L according to DIN 43710
− Type TXA, TXK, TXKH according to
GOST P8.585-2001
For a cold junction compensation (CJC), you
require the 937A-TCJC terminal block as an
accessory instead of the normal
terminal block 1 to 3 or 4 to 6.
• Potentiometers (800 Ω - 20 kΩ) in 3-wire
technique
• Sources for voltage signals between
-100 mV and +100 mV
Mounting and Connection