Rockwell Automation 1441-DYN25-MBAL Balancing Extension Module for the Dynamix 2500 - Manual (Page 19)

Rockwell Automation Publication 1441-UM004A-EN-P - May 2011 19
Balancing Extension Module Chapter 2
Except for the Solution field, all static-couple balancing parameters are identical
to two plane balancing settings.
If you want to compute three correction weights, select Static-Couple for the
Solution parameter on the Balance - Setup screen.
See Balance Extension Module Parameters on page 22 for more information
about these parameters.
Except for attaching three correction and trim weights instead of two (or four if
you split the static weight), all static-couple balancing run procedures are
identical to the two-plane balancing procedures.
See Two Plane Balancing on page 45 on how to perform a two- plane Procedure
section for details.