Rockwell Automation 1441-DYN25-MBAL Balancing Extension Module for the Dynamix 2500 - Manual (Page 57)

Rockwell Automation Publication 1441-UM004A-EN-P - May 2011 57
Balancing Extension Module Chapter 2
10. If necessary, select Yes to proceed with trim runs.
The Trim 1 Weight - Solution screen appears showing the trim weight data
(or select No to end the balance measurement).
Press the Right arrow and use the Plane parameter to move between the
planes.
You can split the correction weight into two distinct angles, as well as
modify the radius of the correction weight. Additionally, the Dynamix
2500 data collector calculates the amount of weight that might be removed
if weights are already attached to the rotor.