Rockwell Automation 1441-DYN25-MBAL Balancing Extension Module for the Dynamix 2500 - Manual (Page 62)

62 Rockwell Automation Publication 1441-UM004A-EN-P - May 2011
Chapter 2 Balancing Extension Module
Load a Previously Saved Setup
You may load a previously saved balance measurement to resume it’s balancing
procedure from any point, or to perform a new measurement with the same
settings.
Follow these steps to load a previously saved balance measurement.
1. From the Balance main menu, select Recall and press Enter.
The Balance – Load Setup screen appears and lists of all your previously
saved balance setups.
2. Select a file and press F3 (Open).
3. Press Enter to start the balancing measurement.
The Initial Run screen appears.