Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Installation Instructions, PRIOR to Firmware rev. 3.0 - Manual (Page 49)

Publication 1404-IN007D-EN-P - October 2004
Powermonitor 3000 49
Optional ControlNet Communications
Powermonitor 3000 units with catalog numbers ending in -CNT are
equipped with a ControlNet communications interface. The
ControlNet Powermonitor 3000 can be connected in a single media or
redundant media network. Figure 40 shows an example ControlNet
network using redundant media.
Figure 40 Powermonitor 3000 ControlNet Network Example
Refer to the following documentation for ControlNet network wiring
requirements and general ControlNet information.
•
ControlNet Cable System Planning and Installation Manual,
publication 1786-6.2.1
•
ControlNet Coax Tap Installation Instructions, publication
1786-5.7
•
ControlNet Coax Media Planning and Installation Guide,
publication CNET-IN002.
1756-CNBR
(in 1756-A4 chassis)
ControlNet
node
ControlNet link
ControlNet
node
redundant media
(optional)
Powermonitor 3000 Device
Powermonitor 3000 Device