Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Installation Instructions, PRIOR to Firmware rev. 3.0 - Manual (Page 7)

Publication 1404-IN007D-EN-P - October 2004
Powermonitor 3000 7
Other Warnings
Product Description The Bulletin 1404 Powermonitor 3000 is uniquely designed and
developed to meet the needs of both producers of and users of
electric power. A Powermonitor 3000 system consists of:
•
Master Module which provides metering and native RS-485
communications
•
Optional Display Module for configuration, commands and data
display
•
Optional communications port to serve data to other devices
using a choice of networks
•
Optional external devices and applications that display and
utilize data for reporting, control and management of power and
energy usage
The Powermonitor 3000 is a microprocessor-based monitoring and
control device ideally suited for a variety of applications including:
•
Load Profiling - Using the configurable trending utility to log
power parameters such as real power, apparent power and
demand, for analysis of power usage by loads over time.
•
Demand Management - Understanding when and why demand
charges occur allows you to make informed decisions that
reduce your electrical power costs.
•
Cost Allocation - Knowing your actual energy costs promotes
manufacturing efficiencies.
ATTENTION
Electrostatic discharge can damage integrated circuits
or semiconductors. Follow these guidelines when
you handle the module.
•
Touch a grounded object to discharge static
potential.
•
Wear an approved wrist strap-grounding device.
•
Do not open the module or attempt to service
internal components.
•
If available, use a static safe workstation.
•
When not in use, keep the module in its static
shield bag.