Rockwell Automation 1769-SM2 Compact I/O DSI/Modbus Communication Module - Manual (Page 15)

Getting Started 1-3
Single mode is a one-to-one connection, where a channel is connected to
a single PowerFlex 4-Class drive (
Figure 1.2 ).
Figure 1.2 Single Mode Wiring Example
An additional DSI peripheral device, such as an external PowerFlex
4-Class HIM or Serial Converter module (22-SCM-232) with a software
tool, can be used with each drive. An AK-U0-RJ45-SC1 DSI Splitter
cable can be used to split the RJ45 connector on the drive into two RJ45
connectors.
Single Mode vs. Multi-Drive Mode
AK-U0-RJ45-TB2P
Terminal Block
Connector
AK-U0-RJ45-TB2P
Terminal Block
Connector
AK-U0-RJ45-TB2P
Terminal Block
Connector
MODULE CH1 CH2 CH3
C H 1
C H 2
C H 3
Powerflex 4-Class Drives
1769-SM2
Module
22-RJ45CBL-C20 Cable, or User-Supplied Wire
(recommend Belden No. 3105A or equivalent)
with AK-U0-RJ45-TB2P terminal block connectors
Ground Wire Connection
(for network communication
shielding)
Earth Ground
Connection
CH1
CH2
CH3