Rockwell Automation 1769-SM2 Compact I/O DSI/Modbus Communication Module - Manual (Page 51)

Configuring the Module 3-13
When using the 1769-SM2 module in Single mode, the optional,
external PowerFlex 4-Class HIM (Human Interface Module) can be used
to access its parameters. Basic steps to access module parameters using
the HIM are shown in
Table 3.E . For additional HIM information, refer
to the PowerFlex 4-Class HIM Quick Reference (publication
22HIM-QR001).
Table 3.E Accessing Module Parameters Using the HIM (22-HIM-A3 or 22-HIM-C2S)
Using the Optional, External PowerFlex 4-Class HIM
Step Example Screens
1. Power up the drive. Then plug the
external HIM into the bottom of the
drive. The Parameters menu for the
drive will be displayed.
2. Press key once to display the
Device Select menu.
3. Press (Enter) key to display the
DSI Devices menu. Press
Arrow to scroll to 1769-SM2.
4. Press (Enter) key to select the
1769-SM2. The Parameters menu
for the module will be displayed.
5. Press (Enter) key to access
the parameters. Edit the module
parameters using the same
techniques that you use to edit drive
parameters.
Parameters
Groups
Linear List
Changed Params
DIAG PARAM DSEL MEM SEL
Sel
Device Select
DSI Devices
DIAG PARAM DSEL MEM SEL
DSI Devices
PowerFlex 40
1769-SM2
Parameters
Linear List
Changed Params
DIAG PARAM DSEL MEM SEL
Mode RO
Parameter: # 001
0 = Controller
VALUE LIMITS SEL