Rockwell Automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. - Manual (Page 12)

Communication Interface Module
Cat. No. 1784-KT2/C
Installation Data
12
Figure 1
Cable Pinouts for the 1784- CP2 Cable
Connecting the 1784-KT2 to a PLC-3
To connect the 1784–KT2 to a PLC–3, follow these steps:
WARNING: To avoid personal injury, always disconnect the
ac power before making the cable connection.
1. Plug the 62–pin connector end of the 1784–CP3 cable into the
1784–KT2 and secure with captive screws.
2. Connect the other end of the 1784–CP3 cable (labeled “Industrial
Terminal End”) into the PERIPHERAL CHANNEL 0 connector on
the PLC–3.
3. Reinstall the ac power cord and turn on the computer.
Figure 2 shows cable pinouts for the 1784–CP3 cable.