Rockwell Automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. - Manual (Page 4)

Communication Interface Module
Cat. No. 1784-KT2/C
Installation Data
4
WARNING: This digital apparatus does not exceed the Class
A limits for radio noise emissions from digital apparatus set out
in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils
numériques de la class A prescrites dans le Règlement sur le
brouillage radioélectrique édicté parleministère des
Communications du Canada.
Preparing the IBM PS/2 Reference diskette for 1784–KT2 configuration
capability, involves:
creating backup diskettes
copying the 1784–KT2 Adapter Description file
creating a backup of the PS/2 configuration
The following sections provide information on these procedures.
Creating Backup Diskettes
Before installing or configuring your 1784–KT2 you need to make backup
copies of the following:
1784–KT2 Options and Diagnostics diskette
Most recent version of the IBM PS/2 Reference diskette
Follow IBM instructions for completing this process.
Important: After you have created the backup copies, store the original
diskettes. All procedures from this point on will be performed using the
backup diskettes.
Copying the 1784-KT2 Adapter Description File
This section explains how to copy the 1784–KT2 Adapter Description file
(60C6. ADF) from the 1784–KT2 Options and Diagnostics diskette to the
IBM PS/2 Reference diskette. You cannot configure the 1784–KT2 until
the Adapter Description file is added to the IBM PS/2 Reference diskette.
To copy the Adapter Description file, follow these steps:
1. Insert the IBM PS/2 Reference diskette into drive A of your
computer.
Preparing the Reference
Diskette for Configuration