Rockwell Automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. - Manual (Page 5)

Communication Interface Module
Cat. No. 1784-KT2/C
Installation Data
5
2. Press the [Control], [Alt] and [Del] keys at the same time.
3. When you receive the following message, press [ENTER].
Press [ENTER) to continue.
4. The main menu appears:
MAIN MENU
1. Learn about the computer
2. Backup the Reference Diskette
3. Set configuration
4. Set features
5. Copy an option diskette
6. Move the computer
7. Test the computer
Use
↑
or
↓
to select. Press Enter.
Escape=Quit F1=Help
Move the cursor down to the Copy an Option Diskette option and
press [ENTER].
5. When the following message appears, insert the 1784–KT2 Options
and Diagnostic diskette into drive A and press [ENTER]:
Remove your backup copy of the Reference
diskette and insert the options diskette into
drive A.
6. Follow the instructions on your screen.
This process copies only the 1784–KT2 Adapter Description file to
the IBM PS/2 Reference diskette. When this copy procedure is
complete, store both diskettes.
Creating a Backup of the PS/2 Configuration
Important: You need to copy the Adapter Description file to the IBM
PS/2 Reference diskette before you perform this procedure. If you have not
yet done so, turn to the previous section for instructions.
To create a backup of the PS/2 computer’s configuration, follow these
steps:
1. Insert the IBM PS/2 Reference diskette into drive A.