Rockwell Automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. User Manual
Page 21
Advertising
Communication Interface Module
Cat. No. 1784-KT2/C
Installation Data
21
The Host Diagnostics Test
The Host Diagnostics option allows you to test for proper communication
between the PS/2 computer and the 1784–KT2. To perform this test, follow
the steps below:
1.
Place your cursor on the Host option and press [ENTER].
2.
You are asked if you want to run a single test (Single Pass) or a
specified number of tests (Repeat). Place your cursor on Single Pass
or on Repeat and press [ENTER].
If you choose Repeat, you are asked how many passes you want to
make. Specify this number and press [ENTER].
After you make your selection, the following screen appears:
Advertising