Rockwell Automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. - Manual (Page 8)

Communication Interface Module
Cat. No. 1784-KT2/C
Installation Data
8
You are now ready to configure your 1784–KT2. Refer to the next section.
Important: You need to prepare the PS/2 Reference diskette for
1784–KT2 configuration capability. If you have not yet done so, refer to
the section earlier in this document.
To configure the 1784–KT2, follow these steps:
1. Insert the IBM PS/2 Reference diskette into drive A.
2. Turn on the computer.
3. During the boot process, the computer beeps twice and error code 165
appears on the screen. This indicates an adapter configuration change.
When the following message appears, press [ENTER]
Press Enter to continue
4. When you receive the following message, type n and press [ENTER].
Automatically configure the system? (Y/N)
5. When the main menu appears, move the cursor down to the Set
Configuration option and press [ENTER].
6. When the Set Configuration menu appears, move the cursor down to
the Change Configuration option and press [ENTER]. A
configuration table with the following type of information appears
(variation is probable):
Configuring the 1784-KT2