Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions - Manual (Page 23)

Publication 1784-IN003D-EN-P - January 2006
Chapter
3
Install the Driver in Windows 2000
Install the Driver in Windows 2000 for the First Time
Follow these steps to install the driver for the first time on a personal computer
running Windows 2000.
1. Shut down the computer.
2. Insert the 1784-PCIC or 1784-PCICS card into an unused PCI slot.
Refer to Chapter 1 for installation information.
3. Restart the computer.
After the computer restarts, the operating system detects the new PCI card
and displays the Found New Hardware Wizard.
For Information On This Topic See Page
Install the Driver in Windows 2000 for the First Time 3-1
Update the Existing Driver in Windows 2000 3-4