Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions - Manual (Page 43)

Once You Have Completed the Installation 5-5
Publication 1784-IN003D-EN-P - January 2006
2. Select the 1784-PCIC or 1784-PCICS card.
3. Select the serial number of the 1784-PCIC or 1784-PCICS card you want.
If you previously configured the card that you selected by serial number, the
chassis monitor remembers the configuration from the last time you used the
card (whether in the same or different slot).
4. Configure the card.
A. Select the ControlNet card.
B. Specify the virtual
backplane slot number.
C. Click OK.
A. If multiple cards are located in your
computer, choose the serial number of
the correct one.
B. Click Next.
A. Specify the node address on the
ControlNet network.
B. Enter the label name for the card
(this is the name you wrote on the
label of the card to help you identify
the card from others in the same
computer).
C. Click Finish.