Install the virtual backplane driver, Install the virtual backplane driver -3 – Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions User Manual
Page 33
Advertising
Install the Driver in Windows 98/Me 4-3
Publication 1784-IN003D-EN-P - January 2006
9. Click OK.
10. Click Next.
11. Click Next.
12. Click Finish.
Install the Virtual Backplane Driver
So that the 1784-PCICS drivers work properly after you install them for the first
time, you must install the Virtual Backplane Driver. Follow this procedure to install
the Virtual Backplane Driver.
1. Select Start
⇒Settings
⇒Control Panel.
2. Double-click Add New Hardware.
You see the Add New Hardware Wizard.
3. Click Next.
Windows searches for the new Plug and Play devices.
4. Click Next.
IMPORTANT
If prompted to overwrite existing files, click Yes.
Advertising
This manual is related to the following products: