Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions - Manual (Page 35)

Install the Driver in Windows 98/Me 4-5
Publication 1784-IN003D-EN-P - January 2006
Update the Existing Driver in Windows 98/Me
Follow these steps to update the existing device driver on a personal computer
running Windows 98/Me.
1. If you are browsing with RSLinx software, close RSWho.
2. Right-click My Computer.
3. Click on the Device Manager tab.
4. In the left window pane, click the + to the left of A-B Virtual Backplane to
expand it.
5. Right-click on A-B 1784-PCIC(S).
6. Click Properties.
IMPORTANT
During the update procedure, communication through the card
will be disrupted.
TIP
If you see more than one A-B 1784-PCIC(S) entry, perform the
update on only one of the entries.