Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions - Manual (Page 31)

Publication 1784-IN003D-EN-P - January 2006
Chapter
4
Install the Driver in Windows 98/Me
Install the Driver in Windows 98/Me for the First Time
Follow these steps to install the driver for the first time on a personal computer
running Windows 98/Me.
1. Shut down the computer.
2. Insert the 1784-PCIC or 1784-PCICS card into an unused PCI slot.
Refer to Chapter 1 for installation information.
3. Restart the computer.
After the computer restarts, the operating system detects the new PCI card
and displays the Add New Hardware wizard.
For Information On This Topic See Page
Install the Driver in Windows 98/Me for the First Time 4-1
Install the Virtual Backplane Driver 4-3
Update the Existing Driver in Windows 98/Me 4-5