Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers Installation - Manual (Page 24)

24 SmartGuard 600 Controllers
Publication 1752-IN001C-EN-P - January 2009
Specifications
SmartGuard 600 Controllers - 1752-L24BBB, 1752-L24BBBE
Attribute 1752-L24BBB 1752-L24BBBE
Dimensions (HxWxD), approx.
99.0 (4) x 99.4 x 131.4 mm (5)
(3.90 (4) x 3.91 x 5.18 (5) in.)
99.0 (4) x 113.0 x 131.4 (5) mm
(3.90 (4) x 4.48 x 5.18 (5) in.)
Weight, approx. 460 g (1.23 lb) 575 g (1.54 lb)
DeviceNet current load, max 15 mA @ 24V DC
Supply voltage (1) 20.4…26.4V DC (24V DC, -15…10%)
Inrush current - unit power supply 4.8 A peak for 600
μ
s @ V0/G0
Inrush current - safety input power
supply 2.6 A peak for 3 ms @ V1/G1
DeviceNet voltage range 11…25V DC
Current consumption
(V0 - internal logic circuit) 230 mA @ 24V DC 280 mA @ 24V DC
Overload protection Shut down of the affected output with cyclic reconnecting
Isolation voltage 50V, Functional insulation type
Tested at 600V AC for 60 s, between all groups
Wire type Copper
Wiring category (2) 2 - on power, signal, and
communication ports 2 - on power, 1 - on signal, 1 -
communication ports
Wire size For power supply and I/O, use 0.2…2.5 mm 2 (12…24 AWG) solid wire,
or 0.34…1.5 mm 2 (16…22 AWG) standard flexible wire. Before
connecting, prepare standard wires by attaching ferrules with plastic
insulation collars (DIN 46228-4 standard compatible)
For Ethernet connections:
RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e
minimum cable according to TIA 569-B.1 or Category 5 cable according
to ISO/IEC 24701
I/O terminal screw torque 0.56…0.79 N•m (5…7 lb•in)
North American temperature code T4A
Input type Current sinking
Voltage, on-state input, min 11V DC
Voltage, off-state input, max 5V DC
Current, off-state input, max 1 mA
Input current 4.5 mA
Input impedance 2.6 k
Ω