Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules - Manual (Page 138)

138 Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013
Appendix A Get Point Status from Modules by Using Explicit Messaging
To obtain individual point status of the Guard I/O module from the Module
Definition dialog box, from the Input Status pull-down menu, choose Pt. Status.
1791DS-IB8XOB8 Module
Definition Configuration Follow this procedure to configure the 1791DS-IB8XOB8 module definition.
1. In the Module Definition dialog box, from the Input Status pull-down
menu, choose Combined Status.
TIP You can also obtain overall status implicitly from this dialog box by
choosing Combined Status from the Input Status pull-down menu. If the
Combined Status changes, use explicit messaging to obtain the point-level
status.