Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules - Manual (Page 52)

52 Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013
Chapter 4 Wiring Examples
Reset Switch
These examples show wiring and controller configuration when using a
Guard I/O module with a reset switch.
Controller
Configuration Parameter Name Configuration Setting
Safety Input 0 Safety Input 0 Channel Mode Standard
Safety Input 0 Test Source None
Dual-channel Safety Input 0/1 Mode Single channel
Test Output 0 Test Output 0 Mode Power supply
Controller
Configuration Parameter Name Configuration Setting
Safety Input 0 Safety Input 0 Channel Mode Standard
Safety Input 0 Test Source None
Dual-channel Safety Input 0/1 Mode Single channel
I0
24V
T0 I1 T1
31819-M
Connect the switch between I0 and T0. T0 must be
configured as a 24V power supply.
I0
24V
T0 I1 T1
31820-M
Connect the switch between 24V DC and I0.