Configure the i/o module, Configure the input channel – Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules User Manual
Page 86
Advertising
86
Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013
Chapter 6
Configure Modules in RSNetWorx for DeviceNet Software
Configure the I/O Module
The following sections use the Safety Configuration tab. Input and output points
change based on the type of module that you configure.
Configure the Input Channel
Follow these steps to configure the input channel.
1. Double-click Input Points xx/xx.
The Input Points folder expands. In this example, 00/01 is shown.
Advertising
This manual is related to the following products: