Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules - Manual (Page 64)

64 Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013
Chapter 5 Configure Modules with the Logix Designer Application
Set Up the Module Definition Follow these steps to edit the module definition. Refer to Values and States of
Tags on page 70 .
1. From the Module Properties dialog box, click Change.
This dialog box appears.
2. From the Series pull-down menu, choose your module’s series level.
3. From the Revision pull-down menu, choose your module’s revision level.
4. Assign the electronic keying.
Integer is the only Data
Format available.
Choose Description
Exact Match All of the parameters must match or the inserted module rejects a
connection to the controller.
Compatible Module Allows an I/O module to determine whether it can emulate the
module defined in the configuration sent from the controller.