Rockwell Automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE Input and Scheduled Output Modules UM - Manual (Page 103)

Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014 93
Appendix
A
Specifications
Specifications The ArmorBlock Sequence of Events Input and Scheduled Sourcing Output
modules (1732E-IB8M8SOER, 1732E-OB8M8SR) have the following
specifications.
General Specifications
Attributes Value
Voltage, power, max 30V DC
Voltage, power, min 12V DC
Current, Module Power, max per module 300 mA @ 24V DC
Current, Auxiliary Power, module only (no
Digital Output loads, no Sensor Voltage
Loads, and no power daisy-chain loads) 25 mA @ 24V DC
Current, Auxiliary Power, max per module
(module plus Digital Output Loads, plus
Sensor Voltage Loads, plus power daisy-
chain loads) 4A @ 24V DC
Isolation voltage Type tested @ 707V DC for 60s
Communication rate EtherNet/IP
10/100 Mbps
Full or half-duplex
100 meter per segment
Status indicators Module status – red/green
Network status – red/green
Link status – green/yellow
Power status – green
I/O LED – yellow
Dimensions, approx., HxWxD 179 x 37 x 27 mm (7.05 x 1.46 x 1.06 in.)
Pilot Duty Rating DC-14
Weight, approx. 0.34 kg (0.75 lb)
Wiring category (1)
(1) Use this Conductor Category information for planning conductor routing. Refer to publication 1770-4.1 , Industrial Automation Wiring and Grounding
Guidelines.
1 – on signal ports
1 – on power ports
1 – on communication ports
Input Specifications – 1732E-IB8M8SOER
Attributes Value
Number of inputs 8 Sink Type
On-state voltage 11V DC, min
24V DC, nom
30V DC, max
Off-state voltage, max 5V DC