Rockwell Automation 1769-IF4FXOF2F Compact Combination Fast Analog I/O Module - Manual (Page 75)

Publication 1769-UM019A-EN-P - October 2008 75
Module Addressing and Configuration with MicroLogix 1500 Controller Appendix B
Configure Analog I/O
Modules in a MicroLogix
1500 System This example takes you through configuring your 1769-IF4FXOF2F
module with RSLogix 500 programming software. This application
example assumes your module is installed as expansion I/O in a
MicroLogix 1500 system, that RSLinx software is properly configured,
and a communication link has been established between the
MicroLogix controller and RSLogix 500 software.
1. From the File menu, choose New to create a new project.
2. Type a name for the project in the Processor Name field.
3. Select your MicroLogix 1500 controller from the list and click
OK.
Software Configuration Channel Defaults
Parameter Default Setting
Enable/Disable Channel Disabled
Input Filter Selection 60 Hz
Input/Output Range -10…10V DC
Data Format Raw/Proportional