Rockwell Automation 1771-QDC, D17716.5.87(Passport) CLAMP AND EJECT MODE - Manual (Page 205)

Enter Your SWTL Configuration Values Here
Enter Your PressureĆalarm and TimeĆdelay Values Here
Blank Worksheets
Appendix A
A-5
Worksheet 3ĆF
SWTL Configuration Values
Control Word ProĆSet 600 Addr. Value Description Units
MCC27 N41:23 Clamp Minimum SWTL Clamp Axis Measured from zero 1
MCC28 N41:24 Clamp Maximum SWTL Clamp Axis Measured from zero 1
MCC29 N41:25 Clamp SWTL Deadband As noted 1
MCC41 N41:37 Ejector Minimum SWTL Ejector Axis Measured from zero 1
MCC42 N41:38 Ejector Maximum SWTL Ejector Axis Measured from zero 1
MCC43 N41:39 Ejector SWTL Deadband As noted 1
1 Incremental Distance
00.00 to 99.99 Inches
000.0 to 999.9 Millimeters
Worksheet 3ĆG
PressureĆalarm and TimeĆdelay Setpoints
Control Word ProĆSet 600 Addr. Value Description Units
MCC35 N41:31 Clamp PressureĆalarm Setpoint Clamp Pressure 2
MCC36 N41:32 ClampĆpressure TimeĆdelay Setpoint Time Measured in Seconds 1
MCC49 N41:45 Ejector PressureĆalarm Setpoint Ejector Pressure 2
MCC50 N41:46 EjectorĆpressure TimeĆdelay Setpoint Time Measured in Seconds 1
1 Time Measured in Seconds 2 Pressure
00.00 to 00.99 0000 to 9999 PSI
000.0 to 999.9 Bar