Rockwell Automation 1794-ASB/E Remote I/O Adapter Module User Manual User Manual
Page 24
![background image](/manuals/579921/24/background.png)
2–6
Installing Your Remote I/O Adapter Module
Publication 1794ĆUM009D-EN-P - April 2004
1.4
(35)
Inches
(Millimeters)
3.4
(87)
3.2
(80)
2.7
(68)
3.7
(94)
3.2
(80)
3.7
(94)
1794 Terminal Base Units
3.7H x 3.7W x 2.7D
(94H x 94W x 69D)
.83 (21)
0.9
(23)
2.3
(59)
1794 Adapters
3.4H x 2.7W x 2.7D
(87H x 68W x 69D)
1.4
(35)
3.7
(94)
2.0
(50)
1.2
(30)
A
A
= Mounting hole dimensions for optional
mounting kit
6. Position the termination base unit up against the adapter and push
the female bus connector into the adapter.
7. Secure to the wall with two #6 self-tapping screws.
8. Repeat for each remaining terminal base unit.
Note: The adapter is capable of addressing eight modules. Do not
exceed a maximum of eight terminal base units in your system.
1.4
(35.5)
1 - Adapter Mounting Plate
2 - Remote I/O Adapter Module
Mounting Screws(18) -
2 for the mounting plate
and 2 each for the 8
possible modules