4 - setup instructions, Chapter objectives, Installing wedge interface – Rockwell Automation 2755-G3-W_G6-W Scanner with Wedge Option User Manual
Page 25: Setup instructions
![background image](/manuals/580103/25/background.png)
A–B
4
Chapter
4–1
Setup Instructions
This chapter provides setup instructions including:
•
Installing the Wedge Interface
•
Enabling Wedge Mode
•
Selecting Terminal Type
•
Scanner Configuration Guidelines
•
Scanner Default Settings
Figure 4.1 shows the basic connections for installing
the scanner as a keyboard wedge interface. The
installation uses two cables: the scanner interface
cable and the wedge interface cable. Cables for the
different terminal types are listed in Table 2.A.
Figure 4.1
Keyboard Wedge Interface Connections
Power Source
Power Supply
Receptacle
Optional Power Supply
Computer
or Terminal
Scanner
AC
Catalog No. 2755-PW1
2755-G6-W
2755-G3-W or
Wedge
Interface Cable
1
1
Optional power supply required for DEC terminals.
Chapter
Objectives
Installing
Wedge Interface