Rockwell Automation 2755-G3-W_G6-W Scanner with Wedge Option - Manual (Page 34)

Setup Instructions
Chapter 4
4–10
Table 4.A lists the factory default settings for each
group of scanner parameters.
Table 4.A
Scanner Default Settings
Keyboard Wedge
Parameter Options Default
Wedge Mode Enable or Disable Enable
Terminal Type PC-AT, PS/2, 50/60/80
PC-XT
IBM 3151
DEC VT220 PC-AT, PS/2, 50/60/80
General Scanner Setup
Parameter Options Default
Power Consumption Enable Continuous Full Power
Enable Standby Continuous Full Power
Beeper Operation Beeper Off
Beeper On; Volume Low
Beeper On; Volume Medium
Beeper On; Volume Loud Beeper On; Volume Loud
Capture Count 1 or 2 1
Spotter Beam Enable or Disable Disable
Autosense Mode Enable or Disable Disable
Scanner
Default Settings