Rockwell Automation 2755-G3-W_G6-W Scanner with Wedge Option - Manual (Page 9)

Using this Manual
Chapter 1
1–2
This manual shows how to set up and use the scanner
as a keyboard wedge interface for non-contact scan-
ning applications. The contents of each chapter are:
Chapter Title Purpose
1 Using this Manual Provides an overview of this manual.
2 Overview of Scanner Gives an overview of scanner functions, oper-
ating modes, and scanner setup parameters.
3 Using the Scanner Provides basic instructions on how to use the
scanner for non-contact scanning.
4 Setup Instructions Shows how to setup the scanner as a
keyboard wedge interface and configure the
operating parameters of the scanner.
5 General
Setup Parameters
Covers parameters specific to the operation of
the scanner including beeper, power con-
sumption, and capture count. Parameters are
selected by scanning bar code labels.
6 Message
Format Parameters
Covers parameters that control the format of
messages transmitted to the host computer or
terminal. Parameters are selected by scanning
bar codes.
7 Symbologies Covers parameters that enable bar code
symbologies the scanner is capable of read-
ing. Symbologies are disabled or enabled by
scanning bar codes.
8 Specifications Details specifications of the scanners.
Overview
of Manual