Rockwell Automation 2755-G3-W_G6-W Scanner with Wedge Option - Manual (Page 47)

Message Format Parameters
Chapter 6
6–4
Scanner ID characters are used to identify individual
scanners when more than one scanner is interfaced
with the host system. Options available are none
(Disabled) or digits 01 through 99.
Scanning label JA disables the scanner identifier.
JA Disable
Scanner Identifier *
To enter a scanner ID, scan label JB and then two
separate digits from Appendix B. The ID characters
cannot exceed 99.
JB
Enable Scanner Identifier
+
plus two characters
For example, to enter a scanner ID of 01, scan the JB
label, then scan codes 0 and 1 in Appendix B.
Scanner
Identifier