Rockwell Automation 2094-BMxx-M Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules Installation Instructions - Manual (Page 6)

6 Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules
Rockwell Automation Publication 2094-IN011D-EN-P - August 2013
Setting the IAM Power Module Ground Jumper (460V)
IMPORTANT Use the default jumper setting for grounded power configurations. Move the jumper, as
shown above, for ungrounded power.
P16
P18
P17
(behind P18)
P19
P18
P19
Bottom Screw
Front Panel Cover
(removed)
Ground jumper set
for grounded configuration
(default setting).
Ground jumper set for
ungrounded configuration.
Top Screw
Removable Jumper
2094-BC01-MP5-M,
2094-BC01-M01-M,
2094-BC02-M02-M,
2094-BC04-M03-M, or
2094-BC07-M05-M
IAM (460V) Power Modules