Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 31)

Setup Instructions
Chapter 4
4–7
Table 4.A lists the factory default settings for each
group of scanner parameters.
Table 4.A
Scanner Default Settings
General Scanner Setup
Parameter Options Default
Power Consumption Enable Continuous Full Power
Enable Standby Enable Standby
Beeper Operation Beeper Off
Beeper On; Volume Low
Beeper On; Volume Medium
Beeper On; Volume Loud Beeper On; Volume Loud
Capture Count 1 or 2 1
External Trigger Disable
External Trigger (+)
External Trigger (–) Disable
Spotter Beam Enable or Disable Disable
Autosense Mode Enable or Disable Disable
Message Format
Parameter Options Default
Prefix None, STX, or SOH None
Suffix None, ETX, CR, LF, HT, or
CR and LF CR and LF
Scanner Identifier Disable or a number (01- 99) Disable
Code Identifier Disable or Enable Disable
Preamble None or 1-4 characters None
Postamble None or 1-4 characters None
Scanner
Default Settings