Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 75)

Symbologies
Chapter 8
8–12
Scan label PF to disable Standard Code 2 of 5.
PF
Disable *
Standard 2 of 5
To enable Standard Code 2 of 5, scan label PG.
PG
Enable
Standard 2 of 5
Minimum Length
To set a minimum length (other than 4) for Standard
Code 2 of 5, scan label PH and then two digits
(04-32) in Appendix B.
PH
Minimum Length
+
(Specified by two digits 04–32)
Maximum Length
To set a maximum length for Standard Code 2 of 5,
scan label PI and then two digits (04-32) in
Appendix B.
PI
Maximum Length
+
(Specified by two digits 04–32)
If the minimum and maximum lengths are set
equal, only codes of that exact length are read.
Standard 2 of 5