Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 88)

Autosense Mode
Appendix C
C–2
Figure C.1
Autostand
Scanner
Scanner Holder
Reflective
Stand Base
#6-32 Thumb Screws
#6-32 Thumb Screws
Stand Riser Label 1
Important: When the scanner is to be powered from
a battery such as in a hand-held terminal, you should
disable Autosense mode. In this application, you may
need to use the power conservation mode (see page
5–3) of the scanner when drawing power from a
battery. Autosense mode will function only in full
power mode.
1 Reflective tape is supplied with the autostand. Additional reflective tape is
available by ordering Catalog No. 2755-NT1.