Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 93)

Scanner Commands
Appendix F
F–2
Serial Communication Parameters
Mnemonic Function Page #
DA Baud Rate = 300 6-2
DB Baud Rate = 600 6-2
DC Baud Rate = 1200 6-2
DD Baud Rate = 2400 6-2
DE Baud Rate = 4800 6-2
DF Baud Rate = 9600 6-2
DG Baud Rate = 19200 6-2
EA 7 Data Bits, 1 Stop Bit, Space Parity 6-4
EB 7 Data Bits, 1 Stop Bit, Mark Parity 6-4
EC 7 Data Bits, 1 Stop Bit, Even Parity 6-4
ED 7 Data Bits, 1 Stop Bit, Odd Parity 6-4
EE 7 Data Bits, 2 Stop Bits, Space Parity 6-5
EF 7 Data Bits, 2 Stop Bits, Mark Parity 6-5
EG 7 Data Bits, 2 Stop Bits, Even Parity 6-5
EH 7 Data Bits, 2 Stop Bits, Odd Parity 6-5
EI 8 Data Bits, 1 Stop Bit, Space Parity 6-6
EJ 8 Data Bits, 1 Stop Bit, Mark Parity 6-6
EK 8 Data Bits, 1 Stop Bit, Even Parity 6-6
EL 8 Data Bits, 1 Stop Bit, Odd Parity 6-6
EM 8 Data Bits, 1 Stop Bit, No Parity 6-5
EN 8 Data Bits, 2 Stop Bits, No Parity 6-6
HA CTS Protocol = None 6-8
HB Protocol = XON/XOFF 6-8
HC Protocol = CTS(+) 6-8
HD Protocol = CTS(–) 6-8
HG RTS always high 6-9
HH RTS always low 6-9
HI RTS high means scanner has data to transmit 6-9
HJ RTS low means scanner has data to transmit 6-9
HK RTS low means scanner ready to receive data 6-9
GA No Intercharacter Delay 6-10
GB Set Intercharacter Delay 6-10
NE Serial Transmit Buffer = Full Buffering 6-11
NF Serial Transmit Buffer = No Buffering 6-11
NG Serial Transmit Buffer = One Label Buffering 6-11