Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 32)

Setup Instructions
Chapter 4
4–8
Table 4.A (continued)
Scanner Default Settings
Serial Communication
Parameters Options Default
Baud Rate 300, 600, 1200, 2400, 4800, 9600,
19200 9600
Serial Data
Transmission
(Start Bit, Data Bits,
Stop Bits, Parity)
7 Data Bits/1Stop Bit/ Odd Parity
Even Parity
Mark Parity
Space Parity
7 Data Bits/2 Stop Bit/Odd Parity
Even Parity
Mark Parity
Space Parity
8 Data Bits/1Stop Bit/ Odd Parity
Even Parity
Mark Parity
Space Parity
No Parity
8 Data Bits/2Stop Bit/ No Parity
7 Data Bits/1Stop Bit/
Space Parity
Intercharacter Delay User Defined Delay (in msec) or
No Intercharacter Delay No Intercharacter Delay
Protocol XON/XOFF, CTS, RTS or None None
Serial Transmit Buffer Full Buffering, No Buffering,
One Label Buffering Full Buffering
Symbologies
Code Options Default
Code 39 Disable Code 39
Enable Standard Code 39
Enable Full ASCII Code 39
Enable Standard Code 39
Enable or Disable Modulo 43
Check Character Disable
Enable or Disable Transmission
of Start/Stop Characters Disable
Minimum Label Length 1
Maximum Label Length 32