Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 13)

Publication 2727-UM003D-EN-P
Overview 1-3
Hardware Description The following illustration shows the location of key hardware
components.
1
2
3
5 7
8
6
4
10
11
13 14
15
9
12
1 Potentiometer with 0-127 linear resolution (option)
2 Electronic handwheel with 50 pulses/rev, -32768 to +32768 (option)
3 Emergency stop switch location (optional only on the MobileView Guard G750
Terminals)
4 Membrane keypad with tactile feedback - standard Windows keyboard operation
5 Illuminated momentary push button, normally open, OFF marking, yellow LED (option)
6 3-position key switch (option)
7 Illuminated momentary push button, normally open, ON marking, yellow LED (option)
8 7.7 inch VGA (640 x 480 pixels) passive matrix color LCD display with analog resistive
touch screen
9 Enabling switch location - one each side of handle (optional only on the MobileView
Guard 750 Terminals)
10 IrDA keyboard/printer interface, 9600 or 115.2K baud
11 Handle for left or right-hand operation
12 Single slot PC card interface for Type I, II and III cards (option)
13 Strain relief for connection cable (shipped with cable)
14 Back cover to connection compartment
15 Plug for cable outlet when not used (meets degree protection IP54)