Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 41)

Publication 2727-UM003D-EN-P
Configuring the MobileView Terminal 3-9
4. The image update starts.
The Updating Image dialog shows the progress of the update.
Tool Version
ATTENTION
!
After starting an update, do not cycle power or
remove the PC card until the update is
complete. If the update is interrupted, the
terminal will become inactive and can only be
initialized and updated using the BootP server.
See the MobileView G750/MT750 Flash Update
documentation for more information.