Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 81)

Publication 2727-UM003D-EN-P
CE Thin Client Operating Instructions 5-5
Shutting Down/Powering
Off the Terminal To shut down or power off the terminal:
1. Close down all applications that are running on CE client.
2. Tap the Start button on the CE client task bar. Select Shutdown
and then Log Off to disconnect from the terminal server.
3. Remove 24V dc power from the MobileView junction box or
disconnect the MobileView connection cable from the junction
box cable.
Setting the Date and Time The real-time clock in the MobileView terminal is not backed up by a
battery. You must reset the date and time and after every power cycle.
Set the date and time by selecting Start>Settings>Control
Panel>Date/Time.
IMPORTANT
The “Flash Storage” directory is the only directory
stored in flash. Programs and data installed in other
directories are lost when power is cycled to the
MobileView terminal. Save all data you want to
retain in the “Flash Storage” directory.