Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 77)

1 Publication 2727-UM003D-EN-P
Chapter
5
CE Thin Client Operating Instructions
Chapter Objectives This chapter provides instructions on how to:
• start up or power on the MobileView terminal
• set up an auto start sequence
• configure Ethernet network settings
• save registry settings
• start terminal services
• shut down or power off the MobileView terminal
• reset the time and date
Starting Up/Powering On
the Terminal To start up or power on the MobileView terminal:
1. Attach the MobileView Connection Cable to the Junction Box
Cable as shown on page 2-4. Tighten threaded coupling until it
is finger tight.
2. Check the MobileView terminal for a start-up screen.
If the start-up screen does not appear, check the 24V dc power
source and cable connections at the Junction Box and
MobileView terminal.