Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 40)

Publication 2727-UM003D-EN-P
3-8 Configuring the MobileView Terminal
1. Tap the Image Update tab.
2. Tap the Image File button. Browse and select the .bin file, then
tap the Start Update button.
• Tap the OK button to stop the IPSM. The message “PSM
deactivate” appears.
• Tap the OK button to quit and reset the terminal. If the terminal
did not reset, the file SoftReset.exe will not copy to the
terminal’s root directory.
• Select Start>Programs>MobileView>MV Configuration Tool
• Repeat step 1.
3. Tap Yes to continue past two warnings.
IMPORTANT
If the IPSM is still formatting the flash area, you will
see the message, “PSM is active. Do you want to
deactivate PSM and reset the device?”. Follow the
bulleted procedure. If this message does not appear,
proceed with step 3.