Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 3)

1 Publication 2727-UM003D-EN-P
Preface
This preface provides information on:
• manual contents
• terminology
• intended audience
• intended uses
• European Communities (EC) Directive Compliance
• standards and agency certifications
• Rockwell Automation Support
Contents of Manual This manual is organized as follows:
Chapter Title Description
1 Overview Gives a general overview of the
MobileView Machine Terminal MT750 and
its features.
2 Terminal Connections Shows how to connect the MobileView
MT750 to the Junction Box, make
Ethernet, serial, and IrDA (keyboard and
printer) connections, use the PC Card slot,
and install the optional mounting bracket.
3 Configuring the MobileView
Terminal Provides details on how to use the
MobileView Configuration Tool to
calibrate operating elements. It also
provides details on how to transfer data
between the MobileView terminal and PC,
and install programs.
4 Using RSView ME Station Describes the RSView ME Station
software installed in the MobileView
2727-M7P20D1Q2 and 2727-M7P20D1Q3
terminals.
5 CE Thin Client Operating
Instructions Gives instructions on how to start up,
configure Ethernet settings, and power off
the MobileView MT750 terminal. It also
gives details on how to start terminal
services.
6 Windows CE Applications Describes the Windows CE software
installed in the MobileView terminal,
generation of Windows CE programs, and
the MobileView MT750 virtual channel.