Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 59)

Publication 2727-UM003D-EN-P
Using RSView ME Station 4-11
To edit communication settings:
1. From the RSLinx Configuration Screen, select the communication
card installed on your terminal.
2. Select the Driver Settings button.
A properties screen opens showing the current communication
settings for the driver.
3. To modify a setting, select the setting and then the Edit button.
The Input Panel opens showing the current setting.
4. Using the Input Panel, modify the setting and then select the
Enter button.
You return to the previous screen with the newly entered data.
To edit the device address of the logic controller:
1. From the RSLinx Configuration screen, select a device node.
2. Select the Edit Device button.
A screen opens showing the name of the device and its current
node address.
3. To modify the device address, press the Device Address button.
The Input Panel opens showing the current address.
4. Using the Input Panel, modify the address and then select the
Enter button.
You return to the previous screen with the new address.
IMPORTANT
Modified settings do not take effect until the terminal
is rebooted.