Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 4)

Publication 2727-UM003D-EN-P
Preface 2
Terminology The MobileView Machine Terminal MT750 is referred to as the
MobileView terminal throughout this manual.
Intended Audience This manual is for the individuals responsible for installing,
configuring, troubleshooting, and operating the MobileView Machine
Terminal MT750 in an industrial environment.
Intended Uses The MobileView Machine Terminal MT750 may only be used for the
types of use described in this manual. This terminal has been
developed, manufactured, tested and documented in accordance with
ergonomic guidelines and the appropriate safety standards. If you
follow the instructions and safety precautions relating to the intended
use are properly observed, the MobileView MT750 does not, under
normal circumstances, represent a danger to the health of personnel
or a risk of damage to other property or equipment.
Observe national regulations for disposing of electronic components.
European Communities (EC)
Directive Compliance The product has the CE mark and is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives. In addition, the device meets the
Council Directive 98/37/EC as a safety component.
7 Maintenance and
Troubleshooting Provides information on cleaning, handling
and troubleshooting the MobileView
MT750 terminal.
A Specifications Gives specifications for the MobileView
MT750 terminal.
B Available Fonts for Terminal
Applications Provides information on pre-installed fonts
and available fonts for download for the
MobileView terminals.
Chapter Title Description