Rockwell Automation 9329 Drive Application Software Tension Control Gen. Units - Manual (Page 37)

FM – Tension Control
Drive Application Software – page 37 of 52
5.3.3.5 TenRf_Pct – Ret 5
Enter a real application tag to store the value of the taper tension percent. This is
the scaled tension reference. May be used for display.
5.3.3.6 RegRf_Pct – Ret 6
Enter a real application tag to store the value of the taper tension percent. This is
the final tension / dancer / torque reference to the regulator.
5.3.3.7 RegFb_Pct – Ret 7
Enter a real application tag to store the value of the taper tension percent. This is
the actual feedback value used by the regulator
5.3.3.8 RegErr_Pct – Ret 8
Enter a real application tag to store the value of the taper tension percent. This is
the actual error of RegRf_Pct to RefFb_Pct as seen by the regulator.
5.3.4 Default Tags used in Drive Application Software