Rockwell Automation 2711 PanelView 550/900 Profibus Communications User Guide - Manual (Page 24)

PROFIBUS DP Communications 24
Publication 2711-6.3
Select Terminal Setup from the PanelBuilder Application menu.
Click the Comms. Setup button to open the Communication Setup
dialog for PROFIBUS DP.
!
ATTENTION: The PROFIBUS DP protocol
mechanisms do not provide the ability to detect and
report a duplicate node address between a DP Master
and slave device, or between two slaves (only between
two DP Masters).
The Communication Setup screen allows you to assign a node
address (from 1 to 125) to the PanelView terminal. The default
address is 7. Each device on the PROFIBUS DP network must be
assigned a unique address. The address you set here will appear in
the New Address and Active Address fields on the Terminal
Communication Setup (screen shown on page 30) after the
download.
PanelBuilder
Communications Setup